What the Tiagra ST-4700 Right Lever Offers
The Shimano Tiagra ST-4700 dual control lever is a 2x10 speed shifter and brake lever in one. It includes Reach Adjust, so you can set the lever position to match your hand size or riding preference. The ergonomic shape and OPTISLICK cable coating help improve routing efficiency and corrosion resistance, while the SUPER SLR design reduces friction for better braking response and modulation.
Installation Steps
Before starting, gather your tools: a hex key, cable cutters, and the appropriate brake and shift cables. The following steps are based on the lever's supplied features.
- Mount the lever on the handlebar: Slide the ST-4700 lever onto the right side of the handlebar. Position it at your preferred angle and tighten the clamp bolt with a hex key to the manufacturer's recommended torque (not supplied here—check your handlebar or lever instructions).
- Route the brake cable: Thread the brake cable through the lever housing and down to the brake caliper. The OPTISLICK coating reduces friction and helps the cable slide smoothly. Secure the cable at the caliper and adjust tension so the brake engages without excessive lever travel.
- Route the shift cable: Run the shift cable from the lever to the front derailleur (for a right lever controlling the front derailleur on a standard 2x10 setup). Use the OT-SP41 housing for optimal performance. The SUPER SLR mechanism helps the cable move freely for crisp shifts.
- Set cable tension and test shifting: After routing, pull the cable tight and secure it at the derailleur. Test each gear shift. If the chain hesitates or skips, adjust barrel tension at the lever or derailleur until shifting is smooth across all 10 speeds.
Adjusting Reach for Your Hand Size
The ST-4700 includes a reach adjust mechanism. To use it, locate the small screw on the lever body (usually a hex set screw). Turning it clockwise moves the lever closer to the handlebar; counterclockwise moves it farther away. Adjust until your fingers can comfortably reach the lever from the hoods or drops. This is especially useful for riders with smaller hands or those who ride in varied positions.
Key Features from the Catalog
- Tiagra ST-4700 Right Lever: The Tiagra ST-4700 features Reach Adjust and an ergonomic form compatible with 2x10 speed drivetrains. Reach Adjust lets you fine-tune lever position for comfort, which is critical for safe braking and precise shifting. The 2x10 compatibility ensures it works with your existing drivetrain.

Tiagra ST-4700 Right Lever - Tiagra ST-4700 Right Lever: Shimano's OPTISLICK cables feature a minimal and uniform electrically coated layer that improves cable routing efficiency and provides excellent corrosion resistance. Better cable routing efficiency means less friction and more consistent shifting over time. Corrosion resistance extends cable life, especially in wet or humid conditions.
- Tiagra ST-4700 Right Lever: SUPER SLR design makes use of a friction-reducing mechanism lever and cable that improves response and modulation. Reduced friction leads to snappier braking and easier shifting, giving you more control on the road.
What the Catalog Doesn't Cover
The supplied records do not include exact torque values for the clamp bolt or specific cable routing diagrams. When installing, refer to your bike's service manual or Shimano's official documentation for torque specs and cable routing details. The OT-SP41 housing is recommended but not mandatory—use any quality shift housing if needed.


