Terug naar blog
Vergelijkingen 2026-11-17 fullertonbicycle 0 weergaven

Boostinator vs New Hubs: Adapting an Older Frame

Boostinator vs New Hubs: Adapting an Older Frame

Compare a Boostinator boost adapter with a new Boost hub for older frames: fit, warranty, and when a wheel boost conversion makes sense.

The real choice: adapt the wheel or change the hub

If you are moving a non-Boost wheel onto a Boost frame, the practical question is not whether you can make the numbers work. It is whether you want to adapt the existing hub or rebuild around a Boost hub. A boost hub spacing adapter such as the Boostinator is the low-cost path, but it comes with a warranty caveat on DT Swiss hubs that you should weigh before you commit. A new Boost hub is the cleaner long-term answer, but it means a rebuild and a different set of costs.

This comparison sticks to what the supplied catalog confirms. Where a detail is not in the record, treat it as a question to resolve with the manufacturer rather than an assumption.

What the Boostinator record actually confirms

  • Boostinator: Compatible with DT Swiss 15x100mm thru axle 350 and 370 series hubs This is the fit boundary. If your hub is not a DT Swiss 350 or 370 with a 15x100mm thru axle, the Boostinator is not confirmed to work for your wheel.
    Boostinator
    Boostinator
  • Boostinator: Includes non-driveside spacer The spacer is part of how the adapter shifts the hub position. It is a specific part, not a generic shim, so keep track of it during installation and removal.
  • Boostinator: Compatible with Centerlock Hubs If your DT 350 or 370 hub uses Centerlock rotor mounting, the record confirms compatibility. If your hub uses a different rotor standard, this detail does not confirm fit.

Boostinator adapter vs new Boost hub

These options solve the same spacing problem in different ways. The comparison below uses only supplied facts for the Boostinator and general reasoning for the new-hub path, without inventing specs for hubs not in the catalog.

  • Fit scope: Boostinator: confirmed for DT Swiss 15x100mm thru axle 350 and 370 series hubs with Centerlock. A new Boost hub: you choose a hub built to Boost spacing, so fit depends on the specific hub and frame rather than an adapter.
  • Warranty position: The supplied record states that use of Boostinator on DT hubs may be considered an alteration under DT's 2-year warranty and any resulting damage may not be covered. A new Boost hub avoids that specific alteration question, though its own warranty terms are not supplied here.
  • Work involved: Boostinator is a hub part with a non-driveside spacer. A new hub generally means rebuilding the wheel around a different hub, which is more labor and possibly new spokes. The supplied record does not include installation steps for Boostinator, so follow the manufacturer's instructions rather than improvising.
  • Cost profile: The catalog lists Boostinator at USD 12.48, compared with a catalog comparison price of USD 24.95. A new Boost hub and rebuild will generally cost more, but exact pricing for hubs is outside this record.
  • Reversibility: An adapter can be removed to return the wheel to its original spacing, while a hub rebuild is a permanent change. The record does not state any reuse limits for the spacer, so inspect it if you swap back and forth.

When the Boostinator is the sensible pick

The Boostinator makes the most sense when you already own a DT Swiss 350 or 370 hub with a 15x100mm thru axle and Centerlock mounting, and you want to try a Boost frame without committing to a rebuild. It is also a reasonable path for a second wheel or a travel setup where you want to keep one wheelset adaptable.

The tradeoff is the warranty note. If your DT hub is still inside its 2-year warranty and you value that coverage, the alteration language in the record is a real consideration. The record does not say the adapter will damage the hub; it says damage resulting from the alteration may not be covered. That is a coverage question, not a prediction of failure.

When a new Boost hub is the better answer

If your hub is not a DT Swiss 350 or 370, or if it is not a 15x100mm thru axle, the Boostinator is not confirmed to fit and a new Boost hub is the straightforward route. The same applies if you are building a new wheel anyway or if you want to avoid any warranty ambiguity on an existing DT hub.

A new hub also lets you choose the axle, rotor mount, and spoke count for the frame you are actually riding, rather than adapting what you have. The supplied catalog does not include a specific Boost hub record in this context, so use the hub manufacturer's fit information for axle spacing and rotor standard before ordering.

A short pre-purchase check

  • Confirm your hub model and axle: The Boostinator record names DT Swiss 350 and 370 series hubs with a 15x100mm thru axle. Check the markings on your hub before assuming it matches.
  • Check rotor mounting: Centerlock is confirmed in the record. If your hub uses a different mounting standard, the adapter's compatibility is not established by the supplied information.
  • Decide how much the warranty matters: The record explicitly notes that Boostinator use on DT hubs may be considered an alteration under DT's 2-year warranty. If that coverage is important to you, a new Boost hub avoids the question.
  • Plan the installation source: The supplied record includes no preparation or operating steps. Use the adapter manufacturer's instructions and do not infer a procedure from the parts list.

Gerelateerde artikelen

Customer Service
Home
Producten
Winkelwagen
Profiel