What a zero stack headset actually does
A zero stack headset, often written ZS, seats its bearings inside the head tube rather than hanging them outside it. The result is a lower stack height and a cleaner front end than a traditional external-cup headset, which is why ZS designs show up on many modern frames.
The 40-Series ZS from Cane Creek is the value-focused line, drawing on the premium 110-Series design and built for durability and low weight. The catalog confirms it is compatible with straight steerer 1-1/8" forks, which is the first spec to check against your own fork.
Zero stack headset questions riders ask before buying
- How is a zero stack headset different from an integrated headset?
- Both sit inside the frame, but they are not interchangeable. A zero stack (ZS) headset uses cups that press into the head tube and hold the bearings, while an integrated headset relies on bearing seats machined directly into the frame. If your frame is designed for ZS cups, you need a ZS headset; if it has machined seats for integrated bearings, a ZS cup will not fit. Check your frame's head tube spec before ordering.
- How do I know if my frame and fork take a 40-Series ZS headset?
- Two numbers matter. First, your frame's head tube bore must match the ZS cup size in the variant name, such as ZS44, ZS49, ZS56 or ZS62. Second, the catalog states compatibility with straight steerer 1-1/8" forks, so a tapered or oversized steerer is outside what the supplied information confirms. Measure both before you buy rather than guessing from the bike model.
- Why are there so many 40-Series ZS variants?
- The variants pair different upper and lower cup sizes to match different frames, and some are conversion or lower-only assemblies. Examples include the 40 ZS44/28.6 ZS44/30 in short and tall cover versions, the 40 ZS44/28.6 ZS56/30, the 40 ZS56/40 Lower Headset, and the 40 ZS49/28.6 EC49/40, which mixes a zero stack upper with an external-cup lower. The numbers after the slash describe the steerer and bearing fit, so match them to your frame and fork rather than picking by looks.
- What do the numbers in a headset name mean?
- In a name like ZS44/28.6, ZS tells you it is a zero stack cup, 44 is the frame head tube bore in millimeters, and 28.6 is the steerer diameter in millimeters, which corresponds to 1-1/8". A second figure such as ZS44/30 or ZS56/40 refers to the lower assembly's bore and bearing sizing. Treat these as fit dimensions to verify, not as a ranking of quality.
- Can I buy just a lower headset?
- Yes. The catalog lists lower-only options such as the 40 ZS44/30 Lower Headset, the 40 ZS56/40 Lower Headset and the 40 ZS56/30 Conversion Lower Headset. This suits riders replacing a worn lower assembly or changing the lower half of the setup while keeping the upper. Confirm your existing upper's sizing before mixing parts.
- Is the 40-Series ZS a downgrade from a premium headset?
- The catalog describes the 40-Series as drawing from the premium 110-Series design and including the features needed for a durable, lightweight, long-lasting headset. It does not list a direct feature-by-feature comparison with the 110-Series, so treat the 40-Series as a value option within the range rather than assuming identical internals.
- What installation steps does the catalog confirm?
- The supplied information does not include press-fit procedures, torque values, bearing preload settings or grease recommendations. Those are safety-critical steps, so follow the headset and frame manufacturer's instructions or have a shop press and adjust the cups. Do not improvise torque figures from a general guide.
- How should I care for a zero stack headset?
- The supplied record does not include a maintenance schedule, so this article cannot give one. As a general habit, keep the area clean and have the headset checked if you notice play, roughness or creaking, and let a mechanic assess bearing condition rather than forcing adjustment.
40-Series ZS at a glance
- 40-Series ZS - Zero Stack Headset: Compatible with straight steerer 1-1/8" forks. This is the single most important fit check before ordering; a tapered or oversized steerer is not confirmed by the supplied information.

40-Series ZS - Zero Stack Headset - 40-Series ZS - Zero Stack Headset: Drawing from the premium 110-Series design, the 40-Series includes the features necessary for a durable, lightweight, long-lasting headset. Explains the value positioning: it is a lighter-duty line than the premium series but built for long service.
- 40-Series ZS - Zero Stack Headset: Available variants include ZS44, ZS49, ZS56 and ZS62 cup sizes, plus short and tall cover options and lower-only assemblies. Shows why you must match bore and steerer dimensions rather than choosing a single universal model.
What the catalog does not confirm
The supplied record does not include bearing dimensions beyond the variant names, stack heights, weight, cup material, or a maintenance and torque schedule. It also does not confirm compatibility with tapered steerers or specific frame models. Where those details matter to your build, verify them with the frame and fork manufacturer before purchase rather than assuming the 40-Series ZS will fit.


